Burning solids, such as paper, wood, fibres, plastics & Oil, Kerosene, Petrol etc.

This extinguisher forms a thick layer of foam over the burning surface, effectively cutting of atmospheric supply of oxygen to the burning surface thereby smothering the fire and preventing re-ignition. Foam extinguishes fire by giving blanketing effect.


technical specification
As per IS Specification & Capacity : AFFF Mechanical Foam IS Spec: 10204: 9 ltrs. & 50 ltrs. as per IS: 13386 latest revision.
Approval BIS : with ISI mark
Construction : Body CRCA Sheets, IS : 513 and IS : 1079
Cap : Brass forging
Anti- Corrosive treatment : Body coated with epoxy powder coating / phosphiatised.
Hydraulic test : Carried out at 30 kg/cm2 as per IS norms.
Charge : AFFF/Clean Water & Co2 gas cartridge is fixed with each extinguisher.
Finish : Post Office Red/Fire Red Epoxy polyester powder coated
Accessories : Wall mounting brackets. (Higher capacity is wheel mounted)
Maintenance : The fire extinguisher must be maintained as per IS :2190 for satisfactory
Performance.
Operation : Keep the KANEX extinguisher upright. Remove the safety clip & strike the knob. Direct discharge to fall on the base of the fire.
FOAM(AFFF) AND WATER EXTINGUISHERS ARE ALSO AVAILABLE IN STORED PRESSURE/SQUEEZE GRIP.

special features
Capacity 9 lits. 50 lits. 135 lits.
IS No. 10204 13386
Jet range(in mtrs.) 6 10 16
Jet range maintained for minm (in sec) 25 40 60
Discharge Time-sec 25-60 40-180 60-180
Minimum % of discharge 90 90 90
Empty weight in kg. 6.5 38.4 96
Full weight in kg. 15.5 89 231